| Fuel-Cutter
is non-elutable type ceramic catalyst .Fuel-Cutter being put into the tank of
gasoline or light oil of a car will decrease incomplete combustion sharply, which
will bring about energy saving and clearization of exhaust gas. |
| FUEL-FUTTER
is a fuel property reforming catalyst made of porous ceramic containing silver,titanium
and plutinum. It can prevent incomplete combustion by mixing with automobil gasoline,
diesel oil or kerocene oil for heaters. Therefor, it helps tosave energy and can
decrease odor from gasoline or diesel nad cut exhaust gas. FUEL-CUTTER is a complete
combustion accelerator for fuel oif. |
 |
Fuel
Oil Catalyst FUEL-CUTTER
Improvement of preservation and prevention
of troubles of combustion equipment. |
Track
Purification
of combustion gas. HC at the time of idling is to 1/10 or less. |
| @ |
| FUEL-CUTTER
eliminates radical (ROO-) which is generated in the process of oxidation
of gasoline or light oil, prevents molecule from becoming gigantic (polymer) and
makes it finer, which enables finer atomization and can always promote full combustion. |
| The
incomplete combustion of a car tends to occur at the time of idling, low-speed,
slow down run and high-speed run (80km/h or more). When using FUEL-CUTTER in a
gasoline vehicle, the amount of discharge of hydro carbon (HC) at idling time
is actually reduced to less than 1/10 compared with the case of an unused vehicle
and a smell almost disappears, which turns out near full combustion. |
@ |
| The
usage of FUEL-CUTTER |
In case of a two-wheeled vehicle
and large-sized track , put FUEL-CUTTER 3 or 6 into the fuel tank directly at
inlet fuel.
In case of passenger car, put FUEL-CUTTER 3 or 6 into the fuel
tank at inlet fuel or inlet fuel-gauge of fuel tank which should be opened by
the mechanic or yourself. |
FUEL-CUTTER
has two kinds of Types, which are FUEL-CUTTER 3 and 6.
FUEL-CUTTER
3 has three peaces of stainless steel case in which packed ceramic catalyst.
FUEL-CUTTER
6 has six pieces of the case. |
| Form | Content | Tank
capacity | Name of
FUEL-CUTTER | | Ingredient | Al2O3ESiO2EMgO2EFe3O4EB2O3EAgEPtETi | 60L
or less | FUEL-CUTTER
3 | | Appearance | Globe
shape with 3or7mm in diamiter | 100L
or less | FUEL-CUTTER
6 | | Effective
term | About
for three to four years | 200L
or less | 2
sets of FUEL-CUTTER 6 | |
| @ |
| Applicable
to |
@Gasoline ( car, two-wheeled vehicle,etc.)
@Light
oil (diesel vehicle, small vessels,etc.)
@Heavy oil (large-sized vessels,
steam-power plant,etc.)
@Oil etc ( engine oil, lubricating oil,etc.) |
| @ |
| The
feature of FUEL CUTTER |
| (1) The improvement, of combustibility
bring about large energy saving ( by delaying electric position ) When a car ryns
flequently economic speed ( near full combustion at 40-70km/hour ) the rate of
energy saving become small. |
| (2) By purification of combustion
gas, the prevention effect of air pollution, bemires large.By the I,proved, of
combustibility ignition time can be delayed, which makes combustion temprature
fall,and makes amount of generated Nox decrease. |
| (3) Always near
full combustion,ensure the improvement running ability as well as the progress
of instantaneous activation. |
| (4) The octane number of gasoline
and cetane number of diesel light oil are omproved a vehicle using high-octane-gasoline
gasoline can be changed into regular gasoline. |
| (5) effectineness
will continue for more than 3 years, ( putting into a tank ) and ther is completely
no secondary pollution, and it is safe and, moreover, is economical. |
| @ |
| Properties
of FUEL-CUTTER |
| 1) Fuel oil ( hydro carbons ) such
as gasoline, diesel, kerocene and crude oil contain minor constituents of sulfur
by bonding 2 or more molecules together ( hydrogen ).By mixing in FUEL-CUTTER,
the polarized minute amount of silver, titanium and platinum i0.01mg / Liter
) break them down to small molecule form. This way the surface tention of the
fuel minimizes and makes easier for atomization ( small particles of mist ).Finaly,
it helps the joining with oxygen making complete combustion possible. |
2)
During the combustion process, fuel is oxidized by oxygen and heat.The process
: Oxidization ¨ peroxide radical components ¨ enlargement molecules¨ prevention
of atomization.
FUEL-CUTTER can eliminate peroxide radical and stop the chain
reaction.
In this way, it will prevent the enlargement of molecules. |
| @ |
| The
Incomplete Combustion and exhaust of automobiles |
|
Incomplete combustion of suto fuel can happen when, 1) idling, 2) slow driving
under 30km/hr and 3) high speed driving over 100km/hr. Full combustion , which
is often called economic speed, is when driving the aytomobile between 40 to 70km/hr.There
are 3 sources of discharge causing air polution from cars. The exhaust pipe, the
crankcase and fuel supply control area. Gases eliminated from the exhaust pipe
are Co ( carbon monoxide ),HC (hydro carbon ) and Nox (nitrogen oxide ). Gas from
the cranhcase is called blow by gas and the pollutant ia HC.HC evaporates from
the gas tank and carburetors. After released into the atmosphere, HC and Nox go
through a photochemical reaction and becomes photochemical smog. |
| @ |
| Examination
results of exhaust gas and energy saving from a gasoline car |
| The
result by Beijing Automobile Technology labolatory which is authorised by China
Government. |
| Component | Before
using FC | After
using FC | Effects | | CO
g/km | 3.03 | 1.97 | -35.0% | decreased | | CO2
g/km | 270.7 | 248.33 | -8.3% | decreased | | HC
g/km | 0.14 | 0.07 | -50.0% | decreased | | Nox
g/km | 0.51 | 0.58 | 13.7% | increased | | Fuel
saving L/100km | 11.75 | 10.72 | -8.8% | improved |
|
Test date : 14 June 2007 / 10:41 ( Before using FC )
Test date : 3 August 2007 / 9:06 ( 48 days After using FC )
Operater and
driver : same person
Test procedure : ECE + EUDC @@@@@Test mode : Dilution |
Vehicle
Basic Data
Vehicle Type : BJ2032CFE 4WD
Engine Type : G4BA@@Engine Number
: 2040Kg 2.7 L
Fuel Density : 0.74@@Fuel Type : 93#
Manufacturer : Beijing
Automobile |
| @ |
| Effects
of the fuel oil catalyst FUEL-CUTTER |
1)Reduce hydrocarbon
(HC) and CO
Can decrease the amount of HC and CO which are occurred by
incompletely burned fuel).With FUEL-CUTTER vaporization becomes substantialy better
thus completely burning fuel. |
2)Drastically saves energy
By
reducing incomplete burning of fuel, 5 to 15% of enegy saving can be achieved. |
3)Prevent
air pollution by reducing exhaust fumes
By completely burning fuel, exhaust
fumes will decrease and drastically eliminate smoke ( especially black smoke ).
I will also clean up the combustion area and lower troubles caused by lack of
maintenance. |
4)Ignition ability and quickness will improve
Changing
from high octane ( super unlead ) to regular unleaded gasoline can be possible. |
5)Catalyst
effectiveness will last more than 3 years
FUEL-CUTTER is completely inorganic
catalyst without any extracting meterial or FUEL-CUTTER is completely inorganic
catalyst without any extracting meterial or |
| @ |
| Placing
in fuel tank |
|
| @ |
@ @ |
